The next build has started.\u00a0 I’m using a Univega Super Strada frame (made by Miyata) and it’s being modified as I type this.\u00a0 The existing cable guides are being repositioned, while some are being removed entirely.\u00a0 There is a half-lap frame break being installed in the drive-side seat stay.\u00a0 Once the metal work is finished, it’s off to be painted.\u00a0 I made some custom decals for this bike, I hope they look nice once they’re on the frame.<\/p>\n
The cable guides are being repositioned because this bike is going to have an 8-speed Shimano internal-gear hub (IGH) with an internal brake, so all I need are guides for the shifter.\u00a0 With no front or rear handbrakes, the frame will be very clean and uncluttered.<\/p>\n
The frame break is being installed as I’m considering installing a belt drive sometime in the future.\u00a0 Installing the joint in the frame now just makes sense.\u00a0 No reason to wait and have to repaint, with all the additional work that requires.\u00a0 I may not ultimately switch to belt drive, but I will have the option.<\/p>\n
The frame paint will be a cream color.\u00a0 The decals are gold, and the lugs will be outlined in gold, and then clear over everything.\u00a0 I’m planning moustache bars, with sewn-on leather grips.\u00a0 I have a nice Acorn bag for the front.\u00a0 The shifter is going to be the J-Tek unit; the saddle will be the Brooks C17 Cambium.<\/p>\n
I’ve got the rims, hubs, and spokes, so I’ll be lacing up the wheels soon.\u00a0 I’m going to hold off on the tires until I get the frame back from being painted – that way I can decide which tires will work best.<\/p>\n
This will be a fun bike, the IGH should mean little maintenance, and if I go with the belt drive, no greasy bits within reach.\u00a0 I’ve not ridden a bike with an IGH before, so I’ll be learning about IGH maintenance and adjustments as I go.<\/p>\n
There will be photos after I get the frame back from the metal work, and then again after it’s painted.\u00a0 Can’t wait.\u00a0 Stay tuned…<\/p>\n","protected":false},"excerpt":{"rendered":"
The next build has started.\u00a0 I’m using a Univega Super Strada frame (made by Miyata) and it’s being modified as I type this.\u00a0 The existing cable guides are being repositioned, while some are being removed entirely.\u00a0 There is a half-lap frame break being installed in the drive-side seat stay.\u00a0 Once the metal work is finished, … <\/p>\n